mirror_CTA-100_1.20-86-0.04

The full file can be found in the Simulation Model repository here.

The first 30 lines of the file are:

# Command line :  -h --dslen 19.2 1.0 13.2 0 0 16.0 1.2 1.2416 6.3 6.9 6.9 6.2 6.3 6.4 6.9 6.9 6.6 6.6
# Parameters for plot_mirrors: -h --dslen 19.200000 1.0 13.2 0 0 16.0 1.2 1.2416 6.3 6.9 6.9 6.2 6.3 6.4 6.9 6.9 6.6 6.6
# Total projected area: 106.3 m**2 for f = 16.0 m
# Total mirror surface area: 107.2 m**2
# Rmax = 6.90 m (Dmax = 13.80 m for symmetric dish)
# Average distance of mirrors to focus: 16.10 m (DC, R=19.20 m)
#
# Column 1: X pos. [cm] (North/Down)
# Column 2: Y pos. [cm] (West/Right from camera)
# Column 3: flat-to-flat diameter [cm]
# Column 4: focal length [cm], typically zero = adapting in sim_telarray.
# Column 5: shape type: 0=circular, 1=hex. with flat side parallel to y, 2=square, 3=other hex. (default: 0)
# Column 6: Z pos (height above dish backplane) [cm], typ. omitted (or zero) to adapt to dish shape settings.
#
# Using 86 hexagonal mirrors inside a radius of 6.90 m (mirror centers inside 6.21 m)
 -620.80     0.00   120.00     0.00 1
 -558.72   107.53   120.00     0.00 1
 -496.64   215.05   120.00     0.00 1
 -434.56   322.58   120.00     0.00 1
 -372.48   430.10   120.00     0.00 1
 -558.72  -107.53   120.00     0.00 1
 -496.64     0.00   120.00     0.00 1
 -434.56   107.53   120.00     0.00 1
 -372.48   215.05   120.00     0.00 1
 -310.40   322.58   120.00     0.00 1
 -248.32   430.10   120.00     0.00 1
 -186.24   537.63   120.00     0.00 1
 -496.64  -215.05   120.00     0.00 1
 -434.56  -107.53   120.00     0.00 1
 -372.48     0.00   120.00     0.00 1